VISION SECURITY SYSTEMS

We pride ourselves on the quality of our products and services

<<back Lighting      Here at Vision Security Systems we can take care of all your lighting needs around the house. We use HAI equipment to give your house a sophisticated look. To give you the complete look we offer different types of lighting and control. Dimmers and Switches: Replace traditional light switches with ones that have attractive, back-lit buttons putting lighting control at your finger tips. These switches work over existing house wiring for easy installation in renovations, retrofits, and upgrades. Lamp Module: Control any lamp up to 300 watts, including setting scenes with it. Just plug a lamp into the lamp module and the lamp module into an electrical outlet. Appliance Module: Control loads up to 15 Amps, general purpose, 1/2 horsepower, including setting scenes with it. Just plug an appliance into the appliance module and the appliance module into an electrical outlet. Scene Switch: Set a lighting scene with the push of one button! Control all lights in a room or area. Lights may be turned on, off, dimmed, brightened, and set to four different scenes to provide limitless options for both security and aesthetic lighting in your home. The buttons on this switch may be custom engraved so that you may "name" the scene that each button controls. Scene Switches have an integrated infrared sensor and its buttons may be activated by a remote control. Scene Switches can be placed into a table top cradle that plugs directly into any electrical outlet. This table top cradle allows for convenient control of your scenes from a bedside nightstand, on desk in a home office, or next to your favorite chair. There is a remote control available to activate scenes through the infrared receiver built into Scene Switches. House Status Switch: When used with an HAI Home Control System this master lighting control shows the status for up to eight rooms. If any light is on in a room, that button is illuminated. Pressing a button on the House Status Switch will turn all of the lights in that room on or off. The buttons on this switch may be custom engraved so that you may "name" the room that each button controls. Load Control Module: The HLC Load Control Module controls the power consumption of high wattage loads such as pool pumps and hot water heater using UPB™.